ADVANTAGE TACTILE SYSTEMS STAINLESS STEEL DOMES AND BARS
DESIGNED FOR DURABILITY , ENGINEERED, FOR ULTIMATE STRENGTH
Advantage Tactile Systems also offers the Advantage One Domes and Bars are individual domes/bars that are drilled and adhered into the ground. A favorite among the architectural community, these stylish domes/bars are aesthetically pleasing and comply with all code requirements
Stainless Steel Domes and Bars ADA tactile detectable warning products for the following and many more applications.
- Curb Ramps
- Vehicular Passage Ways
- Parking Areas
- Top of Stair Landings Wheelchair Ramps
- Pedestrian Crossings
- Escalator Approaches
- Transit Platforms
- Multi-Modal transit Stations
PRODUCT FEATURES
- 316L, Marine Grade Stainless Steel
- Innovative adhesive capture design
- Optimum anti-slip design
- Resistant to heavy traffic abuse and maintenance machinery
- 5 year manufacturer’s warranty
Domes and Bars come in the following styles:
DOMES
- Concentric Rings Pattern
- Crosshatch Pattern
- Carborundum - Non - Slip
BARS
- Crosshatch Pattern
- Carborundum - Non - Slip
- Linear Grooves
PRODUCT OPTIONS
- Stainless Steel
- Aluminum
- Anodized Aluminum Coating
- Brass
- Physical Vapor Deposition Coating (PVD)
STANDARD COLORS
SPECIFICATIONS AND DRAWINGS
PART NUMBER
TILE SIZE
(width x height in inches)
RADIUS
TILE WEIGHT(LB)
DOWNLOAD
INSTALLATION
A. Cut paper template out to match the specified installation area and configuration.
B. Lay template material out over the ground surface to receive the Domes/Bars and secure in place.
C. Drill a hole true and straight to a depth of 1” using appropriate size drill to match the shaft of the tactile indicators being installed.
D. To ensure the template does not move, it is recommended that two anchor points be created prior to drilling the remainder of the holes.
E. If installing multiple locations, a guide may be created as shown to ensure a constant depth and keep the bit straight for all holes.
F. To ensure correct pattern, repeat move the template up one section and anchor. Following the drilling of each hole, the dust should be vacuumed, brushed or blown away.
G. Apply adhesive to fill ¼ of the drilled hole following the adhesive manufacturer’s recommendations.
H. Insert Dome/Bar firmly into the hole
I. Using Acetone on a rag, wipe the area around the Dome/Bar’s perimeter to ensure a clean, dry surface free of any excess adhesive that may have accumulated during installation.
J. Do not allow foot traffic on installed Domes/Bars until the adhesive has cured sufficiently. Curing time is weather dependent (average cure time at 75° F is 30 minutes).
Proudly made in the USA.
Call for certificate of origin
Advantage Tactile© 2021
Advantage Tactile Systems • 241 Main Street, Suite 100 • Buffalo, NY 14203 • Phone: 1-800-679-4022
